1) FULL Submersible heater, made of shock resistant and shatter proof Titanium Alloy tube for fresh or salt water.
2) Voltage AC 110-120V. Temperature can be adjusted between 20-34℃, 68-93F. You can press the ‘SET’ key to shift degree unit between Celsius and Fahrenheit.
3) On/Off indicator light for at-a-glance monitoring. Safety control protects against running dry.
4) The heater will automatically turn off when water level dips too low.
5) Aquarium heater with LED digital display, IP68. Control Accuracy: ±3°F
6) The length of cable is 1.5 m/ 5 ft. Includes suction cups
For better experience and safety, please carefully read and follow the user manual.
Don’t bury the heater in sand or mud.
Please don’t plug in before the heater is well installed.
If you want to clean the fish tank or take out the heater, please disconnect power and wait for 30 MINUTES to cool down.
1* Submersible Aquarium Heater
2* Suction Cups
1* User Manual
If Error code E1 is always showed on the display, the temperature probe on the top of heater may be blocked by small bubbles or excess water. There are two kinds of solutions for your reference. 1. Take out of the heater, shake the top of the rod to remove bubble or excess water in the probe. 2. Reset the heater： (1) Press and hold the set button (2) The LED display will start to flash after the heater is power on (3) Release the set button, and press the button again to set temperature. (4) Take the top of the heater out of water (5) After the LED screen stops flashing, press the set button again to keep the desired temperature
PRECISE TEMPERATURE CONTROL: An intelligent IC chip controls the heater temperature, making the temperature difference within ±1℃/±2ºF; Provide the best living environment for your aquatic creatures
SAFETY GUARANTEE: Made with IP68, the highest waterproof level; and a titanium tube material that features explosion-proof and anti-corrosion engineering, which makes this submersible heater more resistant to damage while heating better than traditional glass heaters; Built with overheat and water shortage protection
EXTERNAL TEMPERATURE CONTROLLER: The touch-button controller adjusts the temperature without getting your hands wet. It’s easy to control the temp from 68℉/20°C to 94℉/34°C; Check the size chart to find your desired fish tank heater
EASY TO SETUP: 300W submersible heater is suitable for 50 to 60 gallons aquariums; Vertical or horizontal installation and ensure the device is fully submerged underwater
WIDE COMPATIBILITY: The fish tank aquarium heater has CE, FCC and ROHS certification and the plug has a UL certification; Applicable for freshwater and marine aquariums, aquaculture, glass containers, and hydroponic systems
Amazon.com Price: $16.99 (as of 26/10/2020 02:19 PST- Details) Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.